Entrar
Cadastre-se
Ajuda
Postou 15/05/2009, 01:10:25
Instalei o Ubunto 9.04 (Jaunty Jackalope) em um Core 2 Dua com 1GB de RAM... Tudo foi perfeito. Reconheceu automaticamente meu adaptador wireless USB, minha multifuncional Epson 4100 e todos os dispositivos USBs que pluguei. Apenas não consigo fazer ele reconhecer meu HD externo USB.
O HD é um Samsung SATA de 250 GB em um case Feasso. A luz do case acende normalmente, mas não localizo o HD em lugar nenhum no Linux. Tentei formatar em NTFS e exFAT, mas não aidantou. Pesquei em alguns foruns, mas todas as soluções propostas não funcionaram.
Preciso muito de ajuda!!!
Quando dou o comando DMESG recebo a seguinte resposta:
Quote
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.98 BogoMIPS (lpj=7181964)
[ 0.004024] Security Framework initialized
[ 0.004029] SELinux: Disabled at boot.
[ 0.004047] AppArmor: AppArmor initialized
[ 0.004055] Mount-cache hash table entries: 512
[ 0.004170] Initializing cgroup subsys ns
[ 0.004174] Initializing cgroup subsys cpuacct
[ 0.004177] Initializing cgroup subsys memory
[ 0.004180] Initializing cgroup subsys freezer
[ 0.004193] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004196] CPU: L2 cache: 2048K
[ 0.004199] CPU: Physical Processor ID: 0
[ 0.004202] CPU: Processor Core ID: 0
[ 0.004205] using mwait in idle threads.
[ 0.004212] Checking 'hlt' instruction... OK.
[ 0.022694] ACPI: Core revision 20080926
[ 0.024136] ACPI: Checking initramfs for custom DSDT
[ 0.349718] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.389413] CPU0: Intel® Core™2 CPU 4300 @ 1.80GHz stepping 02
[ 0.392001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3591.26 BogoMIPS (lpj=7182530)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.476457] CPU1: Intel® Core™2 CPU 4300 @ 1.80GHz stepping 02
[ 0.476475] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.480044] Brought up 2 CPUs
[ 0.480047] Total of 2 processors activated (7182.24 BogoMIPS).
[ 0.480098] CPU0 attaching sched-domain:
[ 0.480102] domain 0: span 0-1 level MC
[ 0.480105] groups: 0 1
[ 0.480111] CPU1 attaching sched-domain:
[ 0.480113] domain 0: span 0-1 level MC
[ 0.480116] groups: 1 0
[ 0.480192] net_namespace: 776 bytes
[ 0.480192] Booting paravirtualized kernel on bare hardware
[ 0.480356] Time: 0:15:49 Date: 05/15/09
[ 0.480356] regulator: core version 0.5
[ 0.480356] NET: Registered protocol family 16
[ 0.480356] EISA bus registered
[ 0.480356] ACPI: bus type pci registered
[ 0.480356] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
[ 0.487565] PCI: PCI BIOS revision 3.00 entry at 0xfabc0, last bus=1
[ 0.487567] PCI: Using configuration type 1 for base access
[ 0.488575] ACPI: EC: Look up EC in DSDT
[ 0.494620] ACPI: Interpreter enabled
[ 0.494626] ACPI: (supports S0 S1 S4 S5)
[ 0.494647] ACPI: Using IOAPIC for interrupt routing
[ 0.498978] ACPI: No dock devices found.
[ 0.498990] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.499078] pci 0000:00:02.0: reg 10 32bit mmio: [0xe2000000-0xe207ffff]
[ 0.499084] pci 0000:00:02.0: reg 14 io port: [0xc000-0xc007]
[ 0.499089] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.499094] pci 0000:00:02.0: reg 1c 32bit mmio: [0xe2080000-0xe20bffff]
[ 0.499172] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe20c0000-0xe20c3fff]
[ 0.499203] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.499208] pci 0000:00:1b.0: PME# disabled
[ 0.499253] pci 0000:00:1d.0: reg 20 io port: [0xb000-0xb01f]
[ 0.499303] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
[ 0.499353] pci 0000:00:1d.2: reg 20 io port: [0xb800-0xb81f]
[ 0.499402] pci 0000:00:1d.3: reg 20 io port: [0xbc00-0xbc1f]
[ 0.499450] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe20c4000-0xe20c43ff]
[ 0.499610] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.499615] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.499619] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.499657] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.499663] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.499670] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.499676] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.499682] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
[ 0.499701] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.499705] pci 0000:00:1f.2: PME# disabled
[ 0.499752] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.499812] pci 0000:01:01.0: reg 10 32bit mmio: [0xe1004000-0xe10047ff]
[ 0.499820] pci 0000:01:01.0: reg 14 io port: [0xa000-0xa07f]
[ 0.499858] pci 0000:01:01.0: supports D2
[ 0.499860] pci 0000:01:01.0: PME# supported from D2 D3hot D3cold
[ 0.499865] pci 0000:01:01.0: PME# disabled
[ 0.499905] pci 0000:01:02.0: reg 10 32bit mmio: [0xe1005000-0xe1005fff]
[ 0.499913] pci 0000:01:02.0: reg 14 io port: [0xa400-0xa4ff]
[ 0.499952] pci 0000:01:02.0: PME# supported from D0 D3hot D3cold
[ 0.499957] pci 0000:01:02.0: PME# disabled
[ 0.500009] pci 0000:01:05.0: reg 10 32bit mmio: [0xe1000000-0xe1003fff]
[ 0.500017] pci 0000:01:05.0: reg 14 io port: [0xa800-0xa8ff]
[ 0.500046] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.500056] pci 0000:01:05.0: supports D1 D2
[ 0.500058] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.500063] pci 0000:01:05.0: PME# disabled
[ 0.500107] pci 0000:00:1e.0: transparent bridge
[ 0.500112] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
[ 0.500116] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xe1ffffff]
[ 0.500129] bus 00 -> node 0
[ 0.500135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.500363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.507685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.507799] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.507911] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.508027] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.508137] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.508247] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.508357] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.508469] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.508646] ACPI: WMI: Mapper loaded
[ 0.508684] SCSI subsystem initialized
[ 0.508684] libata version 3.00 loaded.
[ 0.508684] usbcore: registered new interface driver usbfs
[ 0.508684] usbcore: registered new interface driver hub
[ 0.508684] usbcore: registered new device driver usb
[ 0.508684] PCI: Using ACPI for IRQ routing
[ 0.516014] Bluetooth: Core ver 2.13
[ 0.516035] NET: Registered protocol family 31
[ 0.516035] Bluetooth: HCI device and connection manager initialized
[ 0.516035] Bluetooth: HCI socket layer initialized
[ 0.516035] NET: Registered protocol family 8
[ 0.516035] NET: Registered protocol family 20
[ 0.516053] NetLabel: Initializing
[ 0.516055] NetLabel: domain hash size = 128
[ 0.516058] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.516077] NetLabel: unlabeled traffic allowed by default
[ 0.516218] hpet clockevent registered
[ 0.516221] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.516226] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.516232] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.520086] AppArmor: AppArmor Filesystem Enabled
[ 0.528054] pnp: PnP ACPI init
[ 0.528066] ACPI: bus type pnp registered
[ 0.531088] pnp: PnP ACPI: found 14 devices
[ 0.531091] ACPI: ACPI bus type pnp unregistered
[ 0.531096] PnPBIOS: Disabled by ACPI PNP
[ 0.531105] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.531108] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.531111] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.531114] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.531116] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.531126] system 00:0a: ioport range 0x400-0x4bf could not be reserved
[ 0.531133] system 00:0b: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.531139] system 00:0c: iomem range 0xca800-0xcbfff has been reserved
[ 0.531142] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.531145] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.531148] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.531151] system 00:0c: iomem range 0x3f7f0000-0x3f7fffff could not be reserved
[ 0.531154] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.531157] system 00:0c: iomem range 0x100000-0x3f7effff could not be reserved
[ 0.531160] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.531163] system 00:0c: iomem range 0xfed13000-0xfed1dfff has been reserved
[ 0.531166] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.531169] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.531172] system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.531174] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.531177] system 00:0c: iomem range 0xe0000-0xeffff has been reserved
[ 0.565885] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.565889] pci 0000:00:1e.0: IO window: 0xa000-0xafff
[ 0.565895] pci 0000:00:1e.0: MEM window: 0xe0000000-0xe1ffffff
[ 0.565899] pci 0000:00:1e.0: PREFETCH window: 0x00000040000000-0x000000400fffff
[ 0.565912] pci 0000:00:1e.0: setting latency timer to 64
[ 0.565916] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.565918] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.565921] bus: 01 index 0 io port: [0xa000-0xafff]
[ 0.565923] bus: 01 index 1 mmio: [0xe0000000-0xe1ffffff]
[ 0.565926] bus: 01 index 2 mmio: [0x40000000-0x400fffff]
[ 0.565928] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.565930] bus: 01 index 4 mmio: [0x000000-0xffffffff]
[ 0.565938] NET: Registered protocol family 2
[ 0.580264] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.580568] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.581010] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.581237] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.581239] TCP reno registered
[ 0.588347] NET: Registered protocol family 1
[ 0.588519] checking if image is initramfs... it is
[ 1.016805] Switched to high resolution mode on CPU 1
[ 1.020293] Switched to high resolution mode on CPU 0
[ 1.255165] Freeing initrd memory: 7373k freed
[ 1.255407] cpufreq: No nForce2 chipset.
[ 1.255566] audit: initializing netlink socket (disabled)
[ 1.255594] type=2000 audit(1242346549.253:1): initialized
[ 1.263391] highmem bounce pool size: 64 pages
[ 1.263397] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.264876] VFS: Disk quotas dquot_6.5.1
[ 1.264941] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.265603] fuse init (API version 7.10)
[ 1.265695] msgmni has been set to 1724
[ 1.265882] alg: No test for stdrng (krng)
[ 1.265895] io scheduler noop registered
[ 1.265898] io scheduler anticipatory registered
[ 1.265900] io scheduler deadline registered
[ 1.265914] io scheduler cfq registered (default)
[ 1.265927] pci 0000:00:02.0: Boot video device
[ 1.268614] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.268624] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.268776] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.268779] ACPI: Power Button (FF) [PWRF]
[ 1.268825] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.268828] ACPI: Power Button (CM) [PWRB]
[ 1.269104] processor ACPI_CPU:00: registered as cooling_device0
[ 1.269109] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 1.269285] ACPI: SSDT 3F7F7080, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 1.269487] processor ACPI_CPU:01: registered as cooling_device1
[ 1.269491] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 1.271134] isapnp: Scanning for PnP cards...
[ 1.624196] isapnp: No Plug & Play device found
[ 1.633226] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.633340] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.633433] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.633770] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.633922] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.634105] serial 0000:01:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.634218] 0000:01:02.0: ttyS2 at I/O 0xa408 (irq = 18) is a 16450
[ 1.634291] 0000:01:02.0: ttyS3 at I/O 0xa410 (irq = 18) is a 8250
[ 1.634312] Couldn't register serial port 0000:01:02.0: -28
[ 1.635011] brd: module loaded
[ 1.635352] loop: module loaded
[ 1.635419] Fixed MDIO Bus: probed
[ 1.635424] PPP generic driver version 2.4.2
[ 1.635487] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.635518] Driver 'sd' needs updating - please use bus_type methods
[ 1.635528] Driver 'sr' needs updating - please use bus_type methods
[ 1.635598] ata_piix 0000:00:1f.2: version 2.12
[ 1.635609] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.635613] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.635649] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.635719] scsi0 : ata_piix
[ 1.635805] scsi1 : ata_piix
[ 1.636494] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.636497] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.808219] ata1.00: HPA unlocked: 312579695 -> 312581808, native 312581808
[ 1.808226] ata1.00: ATA-7: WDC WD1600JS-22MHB0, 02.01C03, max UDMA/133
[ 1.808230] ata1.00: 312581808 sectors, multi 16: LBA48
[ 1.816392] ata1.00: configured for UDMA/133
[ 2.164376] ata2.01: ATAPI: LITE-ON DVDRW LH-18A1P, GL0B, max UDMA/66
[ 2.196332] ata2.01: configured for UDMA/66
[ 2.197148] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-22M 02.0 PQ: 0 ANSI: 5
[ 2.197277] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.197294] sd 0:0:0:0: [sda] Write Protect is off
[ 2.197297] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.197324] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.197397] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.197413] sd 0:0:0:0: [sda] Write Protect is off
[ 2.197415] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.197442] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.197445] sda: sda1 sda2 < sda5 >
[ 2.243818] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.243887] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.245001] scsi 1:0:1:0: CD-ROM LITE-ON DVDRW LH-18A1P GL0B PQ: 0 ANSI: 5
[ 2.250096] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.250101] Uniform CD-ROM driver Revision: 3.20
[ 2.250238] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 2.250294] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 2.250970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.250992] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.251010] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.251013] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.251076] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.254993] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.255006] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe20c4000
[ 2.268052] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.268163] usb usb1: configuration #1 chosen from 1 choice
[ 2.268206] hub 1-0:1.0: USB hub found
[ 2.268216] hub 1-0:1.0: 8 ports detected
[ 2.268362] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.268380] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.268401] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.268407] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.268410] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.268453] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.268475] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
[ 2.268551] usb usb2: configuration #1 chosen from 1 choice
[ 2.268578] hub 2-0:1.0: USB hub found
[ 2.268588] hub 2-0:1.0: 2 ports detected
[ 2.268679] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.268685] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.268688] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.268730] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.268758] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 2.268830] usb usb3: configuration #1 chosen from 1 choice
[ 2.268857] hub 3-0:1.0: USB hub found
[ 2.268863] hub 3-0:1.0: 2 ports detected
[ 2.268943] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.268949] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.268953] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.268997] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.269026] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[ 2.269098] usb usb4: configuration #1 chosen from 1 choice
[ 2.269124] hub 4-0:1.0: USB hub found
[ 2.269130] hub 4-0:1.0: 2 ports detected
[ 2.269216] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.269222] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.269225] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.269267] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.269296] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 2.269366] usb usb5: configuration #1 chosen from 1 choice
[ 2.269392] hub 5-0:1.0: USB hub found
[ 2.269398] hub 5-0:1.0: 2 ports detected
[ 2.269522] usbcore: registered new interface driver libusual
[ 2.269552] usbcore: registered new interface driver usbserial
[ 2.269566] USB Serial support registered for generic
[ 2.269582] usbcore: registered new interface driver usbserial_generic
[ 2.269584] usbserial: USB Serial Driver core
[ 2.269636] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.269639] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.269704] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.272083] mice: PS/2 mouse device common for all mice
[ 2.272283] rtc_cmos 00:03: RTC can wake from S4
[ 2.272317] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.272341] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.272403] device-mapper: uevent: version 1.0.3
[ 2.272491] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.272566] device-mapper: multipath: version 1.0.5 loaded
[ 2.272569] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.272647] EISA: Probing bus 0 at eisa.0
[ 2.272676] EISA: Detected 0 cards.
[ 2.272724] cpuidle: using governor ladder
[ 2.272726] cpuidle: using governor menu
[ 2.273266] TCP cubic registered
[ 2.273369] NET: Registered protocol family 10
[ 2.273822] lo: Disabled Privacy Extensions
[ 2.274182] NET: Registered protocol family 17
[ 2.274200] Bluetooth: L2CAP ver 2.11
[ 2.274202] Bluetooth: L2CAP socket layer initialized
[ 2.274205] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.274206] Bluetooth: SCO socket layer initialized
[ 2.274234] Bluetooth: RFCOMM socket layer initialized
[ 2.274240] Bluetooth: RFCOMM TTY layer initialized
[ 2.274242] Bluetooth: RFCOMM ver 1.10
[ 2.275269] Using IPI No-Shortcut mode
[ 2.275340] registered taskstats version 1
[ 2.275442] Magic number: 9:834:253
[ 2.275464] uhci_hcd 0000:00:1d.1: hash matches
[ 2.275501] rtc_cmos 00:03: setting system clock to 2009-05-15 00:15:51 UTC (1242346551)
[ 2.275504] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.275506] EDD information not available.
[ 2.275746] Freeing unused kernel memory: 532k freed
[ 2.275880] Write protecting the kernel text: 4128k
[ 2.275928] Write protecting the kernel read-only data: 1532k
[ 2.291216] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.521609] skge 0000:01:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.521679] skge 1.13 addr 0xe1000000 irq 21 chip Yukon-Lite rev 9
[ 2.522391] skge eth0: addr 00:0f:ea:b5:8b:d2
[ 2.529958] ohci1394 0000:01:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.581029] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 2.622411] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[e1004000-e10047ff] Max Packet=[2] IR/IT contexts=[4/8]
[ 2.627393] ohci1394: fw-host0: Serial EEPROM has suspicious values, attempting to set max_packet_size to 512 bytes
[ 2.717450] usb 1-6: configuration #1 chosen from 1 choice
[ 2.813075] PM: Starting manual resume from disk
[ 2.813080] PM: Resume from partition 8:5
[ 2.813082] PM: Checking hibernation image.
[ 2.813215] PM: Resume from disk failed.
[ 2.832019] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 2.859703] kjournald starting. Commit interval 5 seconds
[ 2.859712] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.123639] usb 1-7: configuration #1 chosen from 1 choice
[ 3.416042] usb 5-2: new low speed USB device using uhci_hcd and address 2
[ 3.583438] usb 5-2: configuration #1 chosen from 1 choice
[ 3.900141] ieee1394: Host added: ID:BUS[0-00:1023] GUID[e31300000000e332]
[ 7.774886] udev: starting version 141
[ 8.012902] Linux agpgart interface v0.103
[ 8.045056] intel_rng: FWH not detected
[ 8.071453] parport_pc 00:08: reported by Plug and Play ACPI
[ 8.071499] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.247779] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.353699] cfg80211: Calling CRDA to update world regulatory domain
[ 8.419895] cfg80211: World regulatory domain updated:
[ 8.419898] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.419901] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.419904] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.419907] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.419909] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.419912] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.464521] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[ 8.465117] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 8.467659] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 8.570445] ppdev: user-space parallel port driver
[ 8.586846] usbcore: registered new interface driver hiddev
[ 8.587656] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0820
[ 8.587701] usbcore: registered new interface driver usblp
[ 8.604415] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input5
[ 8.609371] generic-usb 0003:1267:0210.0001: input,hidraw0: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.3-2/input0
[ 8.609395] usbcore: registered new interface driver usbhid
[ 8.609419] usbhid: v2.6:USB HID core driver
[ 8.618653] iTCO_vendor_support: vendor-support=0
[ 8.620148] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 8.620297] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 8.620716] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.841895] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.841964] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.848344] phy0: Selected rate control algorithm 'pid'
[ 8.873948] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 8.887575] Registered led device: rt2500usb-phy0:radio
[ 8.888125] usbcore: registered new interface driver rt2500usb
[ 9.059302] lp0: using parport0 (interrupt-driven).
[ 9.201583] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
[ 9.738330] EXT3 FS on sda1, internal journal
[ 10.789867] type=1505 audit(1242346560.012:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1966
[ 10.838940] type=1505 audit(1242346560.061:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1970
[ 10.839049] type=1505 audit(1242346560.061:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1970
[ 10.839091] type=1505 audit(1242346560.061:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1970
[ 10.839129] type=1505 audit(1242346560.061:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1970
[ 10.976525] type=1505 audit(1242346560.197:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1975
[ 10.976729] type=1505 audit(1242346560.197:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1975
[ 11.006081] type=1505 audit(1242346560.229:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1979
[ 14.288747] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.288750] Bluetooth: BNEP filters: protocol multicast
[ 14.364083] Bridge firewalling registered
[ 16.153870] [drm] Initialized drm 1.1.0 20060810
[ 16.184973] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.184979] pci 0000:00:02.0: setting latency timer to 64
[ 16.185117] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 16.188382] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 16.188409] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 16.927651] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 18.265210] ppdev0: registered pardevice
[ 18.312280] ppdev0: unregistered pardevice
[ 19.776306] skge eth0: enabling interface
[ 19.779628] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.940704] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.406163] wlan0: authenticate with AP 00:1b:11:55:05:5f
[ 21.416045] wlan0: authenticated
[ 21.416051] wlan0: associate with AP 00:1b:11:55:05:5f
[ 21.422045] wlan0: RX AssocResp from 00:1b:11:55:05:5f (capab=0x421 status=0 aid=24)
[ 21.422049] wlan0: associated
[ 21.423364] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.423445] wlan0: disassociating by local choice (reason=3)
[ 31.916195] wlan0: no IPv6 routers present
[ 270.773338] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 277.727613] wlan0: authenticate with AP 00:1e:58:c1:ca:bd
[ 277.729240] wlan0: authenticated
[ 277.729244] wlan0: associate with AP 00:1e:58:c1:ca:bd
[ 277.732356] wlan0: RX AssocResp from 00:1e:58:c1:ca:bd (capab=0x431 status=0 aid=1)
[ 277.732360] wlan0: associated
[ 644.116019] usb 1-3: new high speed USB device using ehci_hcd and address 5
[ 644.248988] usb 1-3: configuration #1 chosen from 1 choice
[ 644.300863] Initializing USB Mass Storage driver...
[ 644.305434] scsi2 : SCSI emulation for USB Mass Storage devices
[ 644.305589] usbcore: registered new interface driver usb-storage
[ 644.305595] USB Mass Storage support registered.
[ 644.305740] usb-storage: device found at 5
[ 644.305743] usb-storage: waiting for device to settle before scanning
[ 649.304207] usb-storage: device scan complete
[ 655.100026] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 665.344020] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 670.588025] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 670.700018] usb 1-3: device descriptor read/64, error -71
[ 670.916029] usb 1-3: device descriptor read/64, error -71
[ 671.132029] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 671.244039] usb 1-3: device descriptor read/64, error -71
[ 671.460029] usb 1-3: device descriptor read/64, error -71
[ 671.676021] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 672.084021] usb 1-3: device not accepting address 5, error -71
[ 672.196032] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 672.604020] usb 1-3: device not accepting address 5, error -71
[ 672.604048] scsi 2:0:0:0: Device offlined - not ready after error recovery
[ 672.604088] usb 1-3: USB disconnect, address 5
[ 672.716022] usb 1-3: new high speed USB device using ehci_hcd and address 6
[ 672.828039] usb 1-3: device descriptor read/64, error -71
[ 673.044023] usb 1-3: device descriptor read/64, error -71
[ 673.260024] usb 1-3: new high speed USB device using ehci_hcd and address 7
[ 673.372028] usb 1-3: device descriptor read/64, error -71
[ 673.588023] usb 1-3: device descriptor read/64, error -71
[ 673.804025] usb 1-3: new high speed USB device using ehci_hcd and address 8
[ 674.212019] usb 1-3: device not accepting address 8, error -71
[ 674.324028] usb 1-3: new high speed USB device using ehci_hcd and address 9
[ 674.732019] usb 1-3: device not accepting address 9, error -71
[ 674.732040] hub 1-0:1.0: unable to enumerate USB device on port 3
[ 675.056029] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 675.180018] usb 3-1: device descriptor read/64, error -71
[ 675.460018] usb 3-1: device descriptor read/64, error -71
[ 675.732015] usb 3-1: new full speed USB device using uhci_hcd and address 3
[ 675.908014] usb 3-1: device descriptor read/64, error -71
[ 676.132015] usb 3-1: device descriptor read/64, error -71
[ 676.348022] usb 3-1: new full speed USB device using uhci_hcd and address 4
[ 676.756014] usb 3-1: device not accepting address 4, error -71
[ 676.924015] usb 3-1: new full speed USB device using uhci_hcd and address 5
[ 677.332019] usb 3-1: device not accepting address 5, error -71
[ 677.332032] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 1057.604026] usb 3-1: new full speed USB device using uhci_hcd and address 6
[ 1057.728015] usb 3-1: device descriptor read/64, error -71
[ 1057.952028] usb 3-1: device descriptor read/64, error -71
[ 1058.168016] usb 3-1: new full speed USB device using uhci_hcd and address 7
[ 1058.292023] usb 3-1: device descriptor read/64, error -71
[ 1058.516021] usb 3-1: device descriptor read/64, error -71
[ 1058.788015] usb 3-1: new full speed USB device using uhci_hcd and address 8
[ 1059.196015] usb 3-1: device not accepting address 8, error -71
[ 1059.364023] usb 3-1: new full speed USB device using uhci_hcd and address 9
[ 1059.776016] usb 3-1: device not accepting address 9, error -71
[ 1059.776036] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.98 BogoMIPS (lpj=7181964)
[ 0.004024] Security Framework initialized
[ 0.004029] SELinux: Disabled at boot.
[ 0.004047] AppArmor: AppArmor initialized
[ 0.004055] Mount-cache hash table entries: 512
[ 0.004170] Initializing cgroup subsys ns
[ 0.004174] Initializing cgroup subsys cpuacct
[ 0.004177] Initializing cgroup subsys memory
[ 0.004180] Initializing cgroup subsys freezer
[ 0.004193] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004196] CPU: L2 cache: 2048K
[ 0.004199] CPU: Physical Processor ID: 0
[ 0.004202] CPU: Processor Core ID: 0
[ 0.004205] using mwait in idle threads.
[ 0.004212] Checking 'hlt' instruction... OK.
[ 0.022694] ACPI: Core revision 20080926
[ 0.024136] ACPI: Checking initramfs for custom DSDT
[ 0.349718] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.389413] CPU0: Intel® Core™2 CPU 4300 @ 1.80GHz stepping 02
[ 0.392001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3591.26 BogoMIPS (lpj=7182530)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.476457] CPU1: Intel® Core™2 CPU 4300 @ 1.80GHz stepping 02
[ 0.476475] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.480044] Brought up 2 CPUs
[ 0.480047] Total of 2 processors activated (7182.24 BogoMIPS).
[ 0.480098] CPU0 attaching sched-domain:
[ 0.480102] domain 0: span 0-1 level MC
[ 0.480105] groups: 0 1
[ 0.480111] CPU1 attaching sched-domain:
[ 0.480113] domain 0: span 0-1 level MC
[ 0.480116] groups: 1 0
[ 0.480192] net_namespace: 776 bytes
[ 0.480192] Booting paravirtualized kernel on bare hardware
[ 0.480356] Time: 0:15:49 Date: 05/15/09
[ 0.480356] regulator: core version 0.5
[ 0.480356] NET: Registered protocol family 16
[ 0.480356] EISA bus registered
[ 0.480356] ACPI: bus type pci registered
[ 0.480356] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
[ 0.487565] PCI: PCI BIOS revision 3.00 entry at 0xfabc0, last bus=1
[ 0.487567] PCI: Using configuration type 1 for base access
[ 0.488575] ACPI: EC: Look up EC in DSDT
[ 0.494620] ACPI: Interpreter enabled
[ 0.494626] ACPI: (supports S0 S1 S4 S5)
[ 0.494647] ACPI: Using IOAPIC for interrupt routing
[ 0.498978] ACPI: No dock devices found.
[ 0.498990] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.499078] pci 0000:00:02.0: reg 10 32bit mmio: [0xe2000000-0xe207ffff]
[ 0.499084] pci 0000:00:02.0: reg 14 io port: [0xc000-0xc007]
[ 0.499089] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.499094] pci 0000:00:02.0: reg 1c 32bit mmio: [0xe2080000-0xe20bffff]
[ 0.499172] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe20c0000-0xe20c3fff]
[ 0.499203] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.499208] pci 0000:00:1b.0: PME# disabled
[ 0.499253] pci 0000:00:1d.0: reg 20 io port: [0xb000-0xb01f]
[ 0.499303] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
[ 0.499353] pci 0000:00:1d.2: reg 20 io port: [0xb800-0xb81f]
[ 0.499402] pci 0000:00:1d.3: reg 20 io port: [0xbc00-0xbc1f]
[ 0.499450] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe20c4000-0xe20c43ff]
[ 0.499610] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.499615] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.499619] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.499657] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.499663] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.499670] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.499676] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.499682] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
[ 0.499701] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.499705] pci 0000:00:1f.2: PME# disabled
[ 0.499752] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.499812] pci 0000:01:01.0: reg 10 32bit mmio: [0xe1004000-0xe10047ff]
[ 0.499820] pci 0000:01:01.0: reg 14 io port: [0xa000-0xa07f]
[ 0.499858] pci 0000:01:01.0: supports D2
[ 0.499860] pci 0000:01:01.0: PME# supported from D2 D3hot D3cold
[ 0.499865] pci 0000:01:01.0: PME# disabled
[ 0.499905] pci 0000:01:02.0: reg 10 32bit mmio: [0xe1005000-0xe1005fff]
[ 0.499913] pci 0000:01:02.0: reg 14 io port: [0xa400-0xa4ff]
[ 0.499952] pci 0000:01:02.0: PME# supported from D0 D3hot D3cold
[ 0.499957] pci 0000:01:02.0: PME# disabled
[ 0.500009] pci 0000:01:05.0: reg 10 32bit mmio: [0xe1000000-0xe1003fff]
[ 0.500017] pci 0000:01:05.0: reg 14 io port: [0xa800-0xa8ff]
[ 0.500046] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.500056] pci 0000:01:05.0: supports D1 D2
[ 0.500058] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.500063] pci 0000:01:05.0: PME# disabled
[ 0.500107] pci 0000:00:1e.0: transparent bridge
[ 0.500112] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
[ 0.500116] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xe1ffffff]
[ 0.500129] bus 00 -> node 0
[ 0.500135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.500363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.507685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.507799] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.507911] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.508027] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.508137] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.508247] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.508357] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.508469] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.508646] ACPI: WMI: Mapper loaded
[ 0.508684] SCSI subsystem initialized
[ 0.508684] libata version 3.00 loaded.
[ 0.508684] usbcore: registered new interface driver usbfs
[ 0.508684] usbcore: registered new interface driver hub
[ 0.508684] usbcore: registered new device driver usb
[ 0.508684] PCI: Using ACPI for IRQ routing
[ 0.516014] Bluetooth: Core ver 2.13
[ 0.516035] NET: Registered protocol family 31
[ 0.516035] Bluetooth: HCI device and connection manager initialized
[ 0.516035] Bluetooth: HCI socket layer initialized
[ 0.516035] NET: Registered protocol family 8
[ 0.516035] NET: Registered protocol family 20
[ 0.516053] NetLabel: Initializing
[ 0.516055] NetLabel: domain hash size = 128
[ 0.516058] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.516077] NetLabel: unlabeled traffic allowed by default
[ 0.516218] hpet clockevent registered
[ 0.516221] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.516226] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.516232] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.520086] AppArmor: AppArmor Filesystem Enabled
[ 0.528054] pnp: PnP ACPI init
[ 0.528066] ACPI: bus type pnp registered
[ 0.531088] pnp: PnP ACPI: found 14 devices
[ 0.531091] ACPI: ACPI bus type pnp unregistered
[ 0.531096] PnPBIOS: Disabled by ACPI PNP
[ 0.531105] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.531108] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.531111] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.531114] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.531116] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.531126] system 00:0a: ioport range 0x400-0x4bf could not be reserved
[ 0.531133] system 00:0b: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.531139] system 00:0c: iomem range 0xca800-0xcbfff has been reserved
[ 0.531142] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.531145] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.531148] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.531151] system 00:0c: iomem range 0x3f7f0000-0x3f7fffff could not be reserved
[ 0.531154] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.531157] system 00:0c: iomem range 0x100000-0x3f7effff could not be reserved
[ 0.531160] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.531163] system 00:0c: iomem range 0xfed13000-0xfed1dfff has been reserved
[ 0.531166] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.531169] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.531172] system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.531174] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.531177] system 00:0c: iomem range 0xe0000-0xeffff has been reserved
[ 0.565885] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.565889] pci 0000:00:1e.0: IO window: 0xa000-0xafff
[ 0.565895] pci 0000:00:1e.0: MEM window: 0xe0000000-0xe1ffffff
[ 0.565899] pci 0000:00:1e.0: PREFETCH window: 0x00000040000000-0x000000400fffff
[ 0.565912] pci 0000:00:1e.0: setting latency timer to 64
[ 0.565916] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.565918] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.565921] bus: 01 index 0 io port: [0xa000-0xafff]
[ 0.565923] bus: 01 index 1 mmio: [0xe0000000-0xe1ffffff]
[ 0.565926] bus: 01 index 2 mmio: [0x40000000-0x400fffff]
[ 0.565928] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.565930] bus: 01 index 4 mmio: [0x000000-0xffffffff]
[ 0.565938] NET: Registered protocol family 2
[ 0.580264] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.580568] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.581010] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.581237] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.581239] TCP reno registered
[ 0.588347] NET: Registered protocol family 1
[ 0.588519] checking if image is initramfs... it is
[ 1.016805] Switched to high resolution mode on CPU 1
[ 1.020293] Switched to high resolution mode on CPU 0
[ 1.255165] Freeing initrd memory: 7373k freed
[ 1.255407] cpufreq: No nForce2 chipset.
[ 1.255566] audit: initializing netlink socket (disabled)
[ 1.255594] type=2000 audit(1242346549.253:1): initialized
[ 1.263391] highmem bounce pool size: 64 pages
[ 1.263397] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.264876] VFS: Disk quotas dquot_6.5.1
[ 1.264941] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.265603] fuse init (API version 7.10)
[ 1.265695] msgmni has been set to 1724
[ 1.265882] alg: No test for stdrng (krng)
[ 1.265895] io scheduler noop registered
[ 1.265898] io scheduler anticipatory registered
[ 1.265900] io scheduler deadline registered
[ 1.265914] io scheduler cfq registered (default)
[ 1.265927] pci 0000:00:02.0: Boot video device
[ 1.268614] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.268624] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.268776] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.268779] ACPI: Power Button (FF) [PWRF]
[ 1.268825] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.268828] ACPI: Power Button (CM) [PWRB]
[ 1.269104] processor ACPI_CPU:00: registered as cooling_device0
[ 1.269109] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 1.269285] ACPI: SSDT 3F7F7080, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 1.269487] processor ACPI_CPU:01: registered as cooling_device1
[ 1.269491] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 1.271134] isapnp: Scanning for PnP cards...
[ 1.624196] isapnp: No Plug & Play device found
[ 1.633226] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.633340] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.633433] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.633770] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.633922] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.634105] serial 0000:01:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.634218] 0000:01:02.0: ttyS2 at I/O 0xa408 (irq = 18) is a 16450
[ 1.634291] 0000:01:02.0: ttyS3 at I/O 0xa410 (irq = 18) is a 8250
[ 1.634312] Couldn't register serial port 0000:01:02.0: -28
[ 1.635011] brd: module loaded
[ 1.635352] loop: module loaded
[ 1.635419] Fixed MDIO Bus: probed
[ 1.635424] PPP generic driver version 2.4.2
[ 1.635487] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.635518] Driver 'sd' needs updating - please use bus_type methods
[ 1.635528] Driver 'sr' needs updating - please use bus_type methods
[ 1.635598] ata_piix 0000:00:1f.2: version 2.12
[ 1.635609] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.635613] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.635649] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.635719] scsi0 : ata_piix
[ 1.635805] scsi1 : ata_piix
[ 1.636494] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.636497] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.808219] ata1.00: HPA unlocked: 312579695 -> 312581808, native 312581808
[ 1.808226] ata1.00: ATA-7: WDC WD1600JS-22MHB0, 02.01C03, max UDMA/133
[ 1.808230] ata1.00: 312581808 sectors, multi 16: LBA48
[ 1.816392] ata1.00: configured for UDMA/133
[ 2.164376] ata2.01: ATAPI: LITE-ON DVDRW LH-18A1P, GL0B, max UDMA/66
[ 2.196332] ata2.01: configured for UDMA/66
[ 2.197148] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-22M 02.0 PQ: 0 ANSI: 5
[ 2.197277] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.197294] sd 0:0:0:0: [sda] Write Protect is off
[ 2.197297] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.197324] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.197397] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.197413] sd 0:0:0:0: [sda] Write Protect is off
[ 2.197415] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.197442] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.197445] sda: sda1 sda2 < sda5 >
[ 2.243818] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.243887] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.245001] scsi 1:0:1:0: CD-ROM LITE-ON DVDRW LH-18A1P GL0B PQ: 0 ANSI: 5
[ 2.250096] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.250101] Uniform CD-ROM driver Revision: 3.20
[ 2.250238] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 2.250294] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 2.250970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.250992] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.251010] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.251013] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.251076] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.254993] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.255006] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe20c4000
[ 2.268052] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.268163] usb usb1: configuration #1 chosen from 1 choice
[ 2.268206] hub 1-0:1.0: USB hub found
[ 2.268216] hub 1-0:1.0: 8 ports detected
[ 2.268362] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.268380] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.268401] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.268407] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.268410] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.268453] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.268475] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
[ 2.268551] usb usb2: configuration #1 chosen from 1 choice
[ 2.268578] hub 2-0:1.0: USB hub found
[ 2.268588] hub 2-0:1.0: 2 ports detected
[ 2.268679] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.268685] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.268688] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.268730] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.268758] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 2.268830] usb usb3: configuration #1 chosen from 1 choice
[ 2.268857] hub 3-0:1.0: USB hub found
[ 2.268863] hub 3-0:1.0: 2 ports detected
[ 2.268943] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.268949] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.268953] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.268997] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.269026] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[ 2.269098] usb usb4: configuration #1 chosen from 1 choice
[ 2.269124] hub 4-0:1.0: USB hub found
[ 2.269130] hub 4-0:1.0: 2 ports detected
[ 2.269216] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.269222] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.269225] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.269267] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.269296] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 2.269366] usb usb5: configuration #1 chosen from 1 choice
[ 2.269392] hub 5-0:1.0: USB hub found
[ 2.269398] hub 5-0:1.0: 2 ports detected
[ 2.269522] usbcore: registered new interface driver libusual
[ 2.269552] usbcore: registered new interface driver usbserial
[ 2.269566] USB Serial support registered for generic
[ 2.269582] usbcore: registered new interface driver usbserial_generic
[ 2.269584] usbserial: USB Serial Driver core
[ 2.269636] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.269639] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.269704] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.272083] mice: PS/2 mouse device common for all mice
[ 2.272283] rtc_cmos 00:03: RTC can wake from S4
[ 2.272317] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.272341] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.272403] device-mapper: uevent: version 1.0.3
[ 2.272491] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.272566] device-mapper: multipath: version 1.0.5 loaded
[ 2.272569] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.272647] EISA: Probing bus 0 at eisa.0
[ 2.272676] EISA: Detected 0 cards.
[ 2.272724] cpuidle: using governor ladder
[ 2.272726] cpuidle: using governor menu
[ 2.273266] TCP cubic registered
[ 2.273369] NET: Registered protocol family 10
[ 2.273822] lo: Disabled Privacy Extensions
[ 2.274182] NET: Registered protocol family 17
[ 2.274200] Bluetooth: L2CAP ver 2.11
[ 2.274202] Bluetooth: L2CAP socket layer initialized
[ 2.274205] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.274206] Bluetooth: SCO socket layer initialized
[ 2.274234] Bluetooth: RFCOMM socket layer initialized
[ 2.274240] Bluetooth: RFCOMM TTY layer initialized
[ 2.274242] Bluetooth: RFCOMM ver 1.10
[ 2.275269] Using IPI No-Shortcut mode
[ 2.275340] registered taskstats version 1
[ 2.275442] Magic number: 9:834:253
[ 2.275464] uhci_hcd 0000:00:1d.1: hash matches
[ 2.275501] rtc_cmos 00:03: setting system clock to 2009-05-15 00:15:51 UTC (1242346551)
[ 2.275504] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.275506] EDD information not available.
[ 2.275746] Freeing unused kernel memory: 532k freed
[ 2.275880] Write protecting the kernel text: 4128k
[ 2.275928] Write protecting the kernel read-only data: 1532k
[ 2.291216] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.521609] skge 0000:01:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.521679] skge 1.13 addr 0xe1000000 irq 21 chip Yukon-Lite rev 9
[ 2.522391] skge eth0: addr 00:0f:ea:b5:8b:d2
[ 2.529958] ohci1394 0000:01:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.581029] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 2.622411] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[e1004000-e10047ff] Max Packet=[2] IR/IT contexts=[4/8]
[ 2.627393] ohci1394: fw-host0: Serial EEPROM has suspicious values, attempting to set max_packet_size to 512 bytes
[ 2.717450] usb 1-6: configuration #1 chosen from 1 choice
[ 2.813075] PM: Starting manual resume from disk
[ 2.813080] PM: Resume from partition 8:5
[ 2.813082] PM: Checking hibernation image.
[ 2.813215] PM: Resume from disk failed.
[ 2.832019] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 2.859703] kjournald starting. Commit interval 5 seconds
[ 2.859712] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.123639] usb 1-7: configuration #1 chosen from 1 choice
[ 3.416042] usb 5-2: new low speed USB device using uhci_hcd and address 2
[ 3.583438] usb 5-2: configuration #1 chosen from 1 choice
[ 3.900141] ieee1394: Host added: ID:BUS[0-00:1023] GUID[e31300000000e332]
[ 7.774886] udev: starting version 141
[ 8.012902] Linux agpgart interface v0.103
[ 8.045056] intel_rng: FWH not detected
[ 8.071453] parport_pc 00:08: reported by Plug and Play ACPI
[ 8.071499] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.247779] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.353699] cfg80211: Calling CRDA to update world regulatory domain
[ 8.419895] cfg80211: World regulatory domain updated:
[ 8.419898] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.419901] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.419904] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.419907] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.419909] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.419912] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.464521] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[ 8.465117] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 8.467659] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 8.570445] ppdev: user-space parallel port driver
[ 8.586846] usbcore: registered new interface driver hiddev
[ 8.587656] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0820
[ 8.587701] usbcore: registered new interface driver usblp
[ 8.604415] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input5
[ 8.609371] generic-usb 0003:1267:0210.0001: input,hidraw0: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.3-2/input0
[ 8.609395] usbcore: registered new interface driver usbhid
[ 8.609419] usbhid: v2.6:USB HID core driver
[ 8.618653] iTCO_vendor_support: vendor-support=0
[ 8.620148] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 8.620297] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 8.620716] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.841895] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.841964] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.848344] phy0: Selected rate control algorithm 'pid'
[ 8.873948] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 8.887575] Registered led device: rt2500usb-phy0:radio
[ 8.888125] usbcore: registered new interface driver rt2500usb
[ 9.059302] lp0: using parport0 (interrupt-driven).
[ 9.201583] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
[ 9.738330] EXT3 FS on sda1, internal journal
[ 10.789867] type=1505 audit(1242346560.012:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1966
[ 10.838940] type=1505 audit(1242346560.061:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1970
[ 10.839049] type=1505 audit(1242346560.061:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1970
[ 10.839091] type=1505 audit(1242346560.061:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1970
[ 10.839129] type=1505 audit(1242346560.061:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1970
[ 10.976525] type=1505 audit(1242346560.197:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1975
[ 10.976729] type=1505 audit(1242346560.197:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1975
[ 11.006081] type=1505 audit(1242346560.229:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1979
[ 14.288747] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.288750] Bluetooth: BNEP filters: protocol multicast
[ 14.364083] Bridge firewalling registered
[ 16.153870] [drm] Initialized drm 1.1.0 20060810
[ 16.184973] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.184979] pci 0000:00:02.0: setting latency timer to 64
[ 16.185117] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 16.188382] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 16.188409] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 16.927651] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 18.265210] ppdev0: registered pardevice
[ 18.312280] ppdev0: unregistered pardevice
[ 19.776306] skge eth0: enabling interface
[ 19.779628] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.940704] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.406163] wlan0: authenticate with AP 00:1b:11:55:05:5f
[ 21.416045] wlan0: authenticated
[ 21.416051] wlan0: associate with AP 00:1b:11:55:05:5f
[ 21.422045] wlan0: RX AssocResp from 00:1b:11:55:05:5f (capab=0x421 status=0 aid=24)
[ 21.422049] wlan0: associated
[ 21.423364] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.423445] wlan0: disassociating by local choice (reason=3)
[ 31.916195] wlan0: no IPv6 routers present
[ 270.773338] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 277.727613] wlan0: authenticate with AP 00:1e:58:c1:ca:bd
[ 277.729240] wlan0: authenticated
[ 277.729244] wlan0: associate with AP 00:1e:58:c1:ca:bd
[ 277.732356] wlan0: RX AssocResp from 00:1e:58:c1:ca:bd (capab=0x431 status=0 aid=1)
[ 277.732360] wlan0: associated
[ 644.116019] usb 1-3: new high speed USB device using ehci_hcd and address 5
[ 644.248988] usb 1-3: configuration #1 chosen from 1 choice
[ 644.300863] Initializing USB Mass Storage driver...
[ 644.305434] scsi2 : SCSI emulation for USB Mass Storage devices
[ 644.305589] usbcore: registered new interface driver usb-storage
[ 644.305595] USB Mass Storage support registered.
[ 644.305740] usb-storage: device found at 5
[ 644.305743] usb-storage: waiting for device to settle before scanning
[ 649.304207] usb-storage: device scan complete
[ 655.100026] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 665.344020] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 670.588025] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 670.700018] usb 1-3: device descriptor read/64, error -71
[ 670.916029] usb 1-3: device descriptor read/64, error -71
[ 671.132029] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 671.244039] usb 1-3: device descriptor read/64, error -71
[ 671.460029] usb 1-3: device descriptor read/64, error -71
[ 671.676021] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 672.084021] usb 1-3: device not accepting address 5, error -71
[ 672.196032] usb 1-3: reset high speed USB device using ehci_hcd and address 5
[ 672.604020] usb 1-3: device not accepting address 5, error -71
[ 672.604048] scsi 2:0:0:0: Device offlined - not ready after error recovery
[ 672.604088] usb 1-3: USB disconnect, address 5
[ 672.716022] usb 1-3: new high speed USB device using ehci_hcd and address 6
[ 672.828039] usb 1-3: device descriptor read/64, error -71
[ 673.044023] usb 1-3: device descriptor read/64, error -71
[ 673.260024] usb 1-3: new high speed USB device using ehci_hcd and address 7
[ 673.372028] usb 1-3: device descriptor read/64, error -71
[ 673.588023] usb 1-3: device descriptor read/64, error -71
[ 673.804025] usb 1-3: new high speed USB device using ehci_hcd and address 8
[ 674.212019] usb 1-3: device not accepting address 8, error -71
[ 674.324028] usb 1-3: new high speed USB device using ehci_hcd and address 9
[ 674.732019] usb 1-3: device not accepting address 9, error -71
[ 674.732040] hub 1-0:1.0: unable to enumerate USB device on port 3
[ 675.056029] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 675.180018] usb 3-1: device descriptor read/64, error -71
[ 675.460018] usb 3-1: device descriptor read/64, error -71
[ 675.732015] usb 3-1: new full speed USB device using uhci_hcd and address 3
[ 675.908014] usb 3-1: device descriptor read/64, error -71
[ 676.132015] usb 3-1: device descriptor read/64, error -71
[ 676.348022] usb 3-1: new full speed USB device using uhci_hcd and address 4
[ 676.756014] usb 3-1: device not accepting address 4, error -71
[ 676.924015] usb 3-1: new full speed USB device using uhci_hcd and address 5
[ 677.332019] usb 3-1: device not accepting address 5, error -71
[ 677.332032] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 1057.604026] usb 3-1: new full speed USB device using uhci_hcd and address 6
[ 1057.728015] usb 3-1: device descriptor read/64, error -71
[ 1057.952028] usb 3-1: device descriptor read/64, error -71
[ 1058.168016] usb 3-1: new full speed USB device using uhci_hcd and address 7
[ 1058.292023] usb 3-1: device descriptor read/64, error -71
[ 1058.516021] usb 3-1: device descriptor read/64, error -71
[ 1058.788015] usb 3-1: new full speed USB device using uhci_hcd and address 8
[ 1059.196015] usb 3-1: device not accepting address 8, error -71
[ 1059.364023] usb 3-1: new full speed USB device using uhci_hcd and address 9
[ 1059.776016] usb 3-1: device not accepting address 9, error -71
[ 1059.776036] hub 3-0:1.0: unable to enumerate USB device on port 1
Quote
Não exatamente como você tinha me orientado.
